How can we help?

• Rotary Tools
• Rotary Tools
• Troubleshooting

My Accessory is stuck In the Quick-change collet

If your accessory is stuck in the collet while the collar is in the open position, tap the accessory in to offset the friction and remove.

Last update: 14/10/2024, 18:00

• Rotary Tools
• Rotary Tools
• Troubleshooting

Removing a jammed accessory from the rotary tool

If the accessory cannot be released from the quick-change collet, turn the power off and remove from Power / disconnect the Battery. Then, press the spindle lock button and turn the quick-change collet clockwise by hand. Next, press the spindle lock…

Last update: 14/10/2024, 17:19

• Rotary Tools
• Rotary Tools
• Getting Started

What speed should I set my Rotary Tool to?

Choose the rotary tool (RRT130, RRT12, RRT18X, RRTS18) speed based on the material you're working with. Softer materials like wood and plastics typically require lower speeds, while harder materials like steel and ceramics may need higher RPMs…

Last update: 14/10/2024, 17:23

• Rotary Tools
• Rotary Tools
• Getting Started

What speed should I set my Rotary Tool to?

Choose the rotary tool (RRT18, RRT4K, RRTCE16S4K) speed based on the material you're working with. Softer materials like wood and plastics typically require lower speeds, while harder materials like steel and ceramics may need higher RPMs. Always…

Last update: 14/10/2024, 17:27

• Rotary Tools
• Rotary Tools
• Getting Started

What size Battery is recommended?

The Ryobi 18v Rotary Tools will take any size Ryobi 18v ONE+ Battery, however it is recommend to use a 4.0ah or higher for best performance and Runtime.

Last update: 14/10/2024, 17:31

• Rotary Tools
• Rotary Tools
• Getting Started

What are the Rotary Tool Accessories for?

The Ryobi Rotary Tool is compatible with a range of accessories, each designed for specific applications. Each accessory has a designated maximum RPM that must be adhered to for safe operation. Check the list of accessories and see what they are for.

Last update: 14/10/2024, 17:48

• Pressure Washers
• Pressure Washers

How to setup a RYOBI Pressure Washer

Before you start, you have to prime the line. Connect your hose to the water supply and turn it on. With the machine in the off position, simply squeeze the trigger until you see a steady stream of water. Once that's achieved, the system is ready…

Last update: 22/01/2023, 18:52