How can we help?

• Pressure Washers
• Pressure Washers
• Application

Fix RYOBI Pressure Washer with low/no water pressure

Make sure the tap is turned on to medium pressure. If drawing water from non-mains supply is there enough water pressure. If drawing water from a bucket is there is not enough minimum water pressure to run the machine correctly. Check the garden…

Last update: 22/01/2023, 18:51

• Air Compressors
• Air Compressors
• Application

How to connect/disconnect hose or tool to RYOBI Air Compressor

To connect an air hose or air tool from your Compressor, make sure the air compressor is turned off and unplugged from the power source. Rotate the pressure regulator knob fully counter-clockwise. Confirm that the outlet pressure is at zero (0) bar…

Last update: 10/07/2023, 15:26

• Secateurs
• Secateurs
• Application

How to change RYOBI Secateurs blades

You'll need to remove the blade correctly first before installing the new blade.

Last update: 12/08/2022, 13:49

• Sanders
• Belt Sanders
• Application

How to replace the belt on a Ryobi Belt Sander

To fit or replace the belt, unplug the power cord if you have an AC model or if you have a cordless one remove the battery. Then take the tension off the belt by pulling back the tensioning lever and slide the old belt out. Now, position the belt…

Last update: 08/05/2023, 16:51

• Leaf Blowers & Blower Vacs
• Blower Vacs
• Application

What is the metal wire inside my RYOBI battery powered Blower Vacuum?

This is an anti-static grounding device inside the unit and is meant to be there. Don’t attempt to remove or alter it.

Last update: 22/01/2023, 17:49

• Application

What does a RYOBI Thicknesser do?

A Thicknesser, also known as a Planer-Thicknesser is essentially a benchtop version of a hand planer. It’s used to plane wood to a consistent thickness throughout its length. They can also be used to square off posts while at the same time removing…

Last update: 02/09/2022, 16:48

• Application

How to feed timber into a RYOBI Thicknesser

To feed timber into a RYOBI Thickness Planer (also known as a Thicknesser), at the front of the machine, there's a sealed power switch with emergency stop button. To turn it on, unclip and lift the cover, press the green button, and rest the cover…

Last update: 02/09/2022, 16:51