80V HP™ 42” LITHIUM ZERO TURN RIDE-ON MOWER (R80XZTR42)

To operate the foot and parking brake on a RYOBI 80V 42” Lithium Zero Turn Ride-On Mower, start by moving the joystick into the central lock position. Then fully depress and hold the brake pedal. Rock your foot forward to fully depress and activate…

To remove shipping packaging from a RYOBI 80V 42" Lithium Zero Turn Ride-On Mower, start by cutting the small zip ties securing the plastic cover. Then, remove the boxes containing loose parts, assembly hardware and the documentation. Then set…

To replace RYOBI 80V Lithium Zero Turn Ride-On Mower blades on a paired blade cutting system, the holes in the blades must be aligned with the corresponding shapes to ensure that the blades are the correct way up. Apply silver grease (anti-seize) to…

The Safety Interlock System shuts down the blades, should you leave your RYOBI 80V 42" Lithium Zero Turn Ride-On Mower seat while the unit is still running. To test the system is working correctly, position the mower on a level surface like a…

It's safe to leave a RYOBI 80V Lithium Zero Turn Ride-On Mower on charge while not in use. In fact, to maximise life and performance of the batteries, always connect the mower to the charger when it’s not in use. If you're unable to leave…

To pair RYOBI 80V Lithium Zero Turn Ride-On Mower with mobile app, first download the free RYOBI Ride-on Mower mobile App from the Apple app store or Google Play store. Activate Bluetooth on your mobile. From the home screen on your mobile, launch…

With everything assembled, there are three more steps to get your RYOBI 80V 42” Lithium Zero Turn Ride-On Mower ready to drive off the shipping crate. You'll need to check the tyre pressure, adjust the cutting deck height, operate the parking…

If your RYOBI 80V Lithium Zero Turn Ride-On Mower has poor grass discharge, it may be because the side discharge chute or opening is clogged. Clean the side discharge chute and opening. It may also be cause by the grass being wet. Allow the grass to…

If your RYOBI 80V Lithium Zero Turn Ride-On Mower won't connect with mobile app, the mower may not be within range of the phone. Ensure that the phone is within 15 metres of the product and try again. Uninstall and reinstall the mobile…

If your RYOBI 80V Lithium Zero Turn Ride-On Mower won’t move, it may be because the start key is not installed or is in the OFF position. Try installing the the start key and turn it to the ON position. It may also be because the joystick is not…

If your RYOBI 80V Lithium Zero Turn Ride-On Mower won’t start, it may be because the battery charge is low. Charge your battery and try to start the mower again. It may also be because the charger is connected to the mower. Disconnect the charger…

The tyre pressures for the RYOBI 80V 42" Lithium Zero Turn Ride-On Mower are: Front Tyres: 1.0 Bar (14.5psi), Rear Tyres: 1.4 Bar (20psi). It’s important to check the air pressure in all tyres before use, as well as making it part of your…

If your RYOBI 80V Lithium Zero Turn Ride-On Mower blades stops while in use, it may be because the battery is low - the deck motor turns off when the battery power gets low to allow you enough time to drive back to the charging location. Drive back…

There is an LCD Control Panel on your RYOBI 80V Lithium Zero Turn Ride-On Mower, with a series of LCD settings, including the Main Dashboard, Battery Monitoring, Blade Check, Battery Under Temperature Range, Battery Over Temperature Range, and Low…

To understand what each of the battery charger lights mean on your RYOBI 80V Lithium Zero Turn Ride-On Mower, refer to the battery lights guide below.

If your RYOBI 80V Lithium Zero Turn Ride-On Mower headlights aren't working, it may be because the headlights are off. Press the headlight button to turn on the headlights. If this doesn't work, the headlights may be damaged. If so,…