SEARCH
Enter keywords, product name, or question
| Possible Cause | Solution |
|---|---|
| The start key is not installed or is in the OFF position. | Install the start key and turn it to the ON position. |
| The joystick is not pulled up. | Pull up the joystick. |
| The joystick is in the neutral position. | Move the joystick in the preferred direction (forward or reverse). |
| The brake is pressed and/or parking brake is engaged. | Release the brake pedal and the parking brake, then set the joystick in the neutral position to reset the mower. |
| The charger is connected to the product. | Disconnect the charger from the mower. |
| The operator is not fully seated. | Sit fully on the seat, return the joystick to the neutral position, and try again. |
R80XZTR30, R80XZTR42, R80XZTR54
