How to remove shipping packaging from a RYOBI 80V 42" Lithium Zero Turn Ride-On Mower

Last update: 17/03/2023, 11:50

R80XZTR42

Step	Action
Note:	All tools are included with exception of a socket wrench with a 13mm, a pair of sharp scissors as well as a tyre pressure gauge.
1.	Start by cutting the small zip ties securing the plastic cover.
2.	Then, remove the boxes containing loose parts, assembly hardware and the documentation.
3.	Then set aside all accessible packaging and wrapping from the unit and parts.
4.	Don’t throw away the packing material until you have carefully inspected and operated the mower to your satisfaction.
5.	Cross-check all items listed in the packing list are included. Lay everything out, inspect the mower and parts carefully for any breakage or damage that may have occurred during shipping.
6.	Should you find any of the parts damaged or missing, call RYOBI Customer Service on 0508 697 9624 to arrange replacement of any missing or damage parts
7.	Using your 13mm socket and supplied spanner, remove the bolts securing the corner and side braces to the frame bottom.
8.	Then lift the braces to remove them.
9.	Carefully cut the nylon straps securing the front and rear wheel axles to the frame.

How can we help?