80V HP™ 42” LITHIUM ZERO TURN RIDE-ON MOWER (R80XZTR42)

If your RYOBI 80V Lithium Zero Turn Ride-On Mower blades continue to turn after I leave the seat, the safety interlock system may not be functioning correctly. Ensure that the safety interlock system seat plug is fully connected. If the blades still…

If you find your RYOBI 80V Lithium Zero Turn Ride-On Mower have poor runtime, first check that you are using the correct tyre pressure. Inclines, length of grass, wet grass, blunt blades as well as age and condition of batteries all impact overall…

The safety interlock system seat plug detects if you leave the seat and will beep as a safety feature if your RYOBI Lithium Zero Turn Ride-On Mower is on. The parking brake may not have been engaged or the start key is still installed and in the ON…

It may be because the tyre pressure is uneven - check the tyre pressure in all four tyres. You may be using the incorrect tyre pressure. This will affect the level of the deck in order to cut grass evenly. Check the tyre pressure is correct. It may…

If your RYOBI 80V Lithium Zero Turn Ride-On Mower isn't mulching properly, it may be because there are wet grass clippings sticking to the underside of the deck. Try waiting until the grass dries before mowing. Another cause may be that the…

If your RYOBI 80V Lithium Zero Turn Ride-On Mower is vibrating at a higher speed, it may be because the blade is unbalanced, loose or unevenly worn. Check the blade, and replace if required. It may also be because the motor shaft is bent. Stop the…

If your RYOBI 80V Lithium Zero Turn Ride-On Mower blades won't rotate, start by checking if the battery charge is low. If so, charge the battery. The issue may also be caused by the side discharge interlock switch not being engaged by the side…