18V ONE+ HP™ Brushless 6.4mm (¼”) Trim Router - Tool Only (RTR18C)

If you cannot change or remove Router's Bit, make sure that you are using a suitable wrench. Check if the collet nut is overtightened and if the bit is stuck in the collet. Then, check if collet nut is not engaged. Also, if there are dust and…

There are various reasons why Cordless Router has poor battery runtime. Is a suitable battery being used? Does the task require a larger battery? Check if it is the battery, and not the tool. Is the battery older than 3 years? Are you storing your…

Before making any adjustments, turn off and disconnect the trim router from power (Battery or AC). Follow the instructions to adjust the depth on trim router.

Trim routers accept a wide variety of router bits to provide a different cutting, routing, or trimming finish. All Ryobi Trim routers will accept a ¼” or 6.35mm router bit into the collet. Before starting, turn off and disconnect the trim router…

To Remove a Router bit to a RYOBI Trim Router, you must turn off and disconnect the trim router from power (Battery or AC). Also, for best access to the collet, we recommend removing the adjustable base. Start by press and holding the spindle lock…

It is not a valid return reason when router excessively vibrates. Assist the customer with the following steps to avoid excessive vibrations: Is the router bit unbalanced or damaged? Is the router bit loose? Is the router base assembled securely?…

It is not a valid return reason when router makes excessive noise. Assist the customer with the following steps to avoid excessive noise: Is the Router bit dull? Are you using the right speed setting for your task? Is the router's base…

Cutting out could be a result of Many varied reasons from the bit, tool use, power supply or application. If the issue is not resolved after checking the Bit, the Application, Battery, Power Cord and the Tool, and the Router is still within the…

If your RYOBI router won't turn on, first check the battery for charge; remove it, recharge if low, and inspect the bit/base assembly for wear or obstructions before reinserting the battery. For corded models, unplug the router, examine the…

Trim routers can be dangerous if used improperly; they can kickback if not used in correct orientation or without enough support.

Check and understand the common names of the elements of components of a trim router.

Check the common types of router bits used and the finish they can achieve.

It is recommended to use a 4.0ah battery or higher for optimum runtime and performance. Smaller batteries can be used, but often they will have reduced runtimes and performance levels.