18V ONE+ STAPLER - TOOL ONLY (R18ST50-0)

Before you begin, make sure you’re using T50 staples with a crown or width of approximately 10mm or 3/8 inches, as any other gauge or type will damage the stapler. We recommend 10mm T50 Staples. First, remove the battery from the Stapler before…

Regular basic maintenance will help provide trouble free operation. Collated nails and staples usually have glue on them to bind them together, which over time, can leave a residue on the magazine and the firing pin. To clean the residue, disconnect…

Regular basic maintenance will help provide trouble free operation. Collated nails and staples usually have glue on them to bind them together, which over time, can leave a residue on the magazine and the firing pin. To remove residue, disconnect…

The RYOBI 18V One+ Stapler is capable of driving staples into wood, upholstery (fabrics), plastics, paper/cardboard, carpet underlay, insultation and even to secure fencing wire and wire screen (with the right accessory). If you find your Crown…

If you find your nails don't fire deep enough or your brads aren't flush, try the following troubleshooting steps: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment…

Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples.

The recommended battery for all Fastener tools is the RYOBI 18V ONE+ Compact 4.0AH Battery (RB1840C) it has a good balance of power, runtime, and weight. However, any battery from the RYOBI ONE+ range is suitable. Just note that higher capacity…

RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect-sized fasteners can be dangerous and will result in the tool jamming or breaking - voiding the warranty. Ensure the nails are compatible…