How can we help?

• Pressure Washers
• Pressure Washers
• Troubleshooting

Why does my RYOBI Pressure Washer start then stop straight away?

If your RYOBI Pressure Washer starts then stops straight away, check that the tap is turned on fully, and that there’s enough water pressure coming from the water source. Drawing water from sources like a bucket will not provide enough pressure for…

Last update: 22/01/2023, 19:01

• Pressure Washers
• Pressure Washers
• Troubleshooting

Troubleshoot RYOBI Pressure Washer that stops during use

If using for an extended period, it's possible the motor over-heated and the thermal overload switch has activated. Allow time for the motor to cool and then restart. The motor maybe low on power if running extra-long or multiple extension leads…

Last update: 22/01/2023, 18:57

Which grit paper should I use with my RYOBI sander?

Grit Paper for Sander

Last update: 19/07/2022, 10:46

• Pressure Washers
• Pressure Washers
• Troubleshooting

What to do if you can’t disconnect hose from RYOBI Pressure Washer

If you can’t disconnect the pressure hose from your RYOBI Pressure Washer, it may be because the pressure hose is still under water pressure, which needs to be released. Turn off the water supply, then turn off the machine. Now, squeeze the trigger…

Last update: 22/01/2023, 18:56

• Hedge Trimmers
• Hedge Trimmers
• Application

What's the maximum cutting capacity of my RYOBI Hedge Trimmer?

Each RYOBI Hedge Trimmers has a maximum cut capacity. Check the serial plate for your model number and refer to the following list.

Last update: 20/01/2023, 16:52

• Sanders
• Belt Sanders
• Troubleshooting

What size belt & brand fits my Ryobi Cordless Belt Sander?

For the 18V One+ Belt Sander (R18BS-0) & all previous cordless models, the 76mm x 457mm sized belt is compatible. For the 800W Belt Sander Variable Speed (EBS800V) & all previous cordless models, the 76mm x 533 mm belt is compatible.

Last update: 15/09/2022, 13:06

• Sanders
• Belt Sanders
• Application

How to align the belt tracking on a Ryobi Belt Sander

To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any alignment adjustments. But if you notice…

Last update: 30/11/2022, 14:21