SEARCH results
7 Matching results
Fix RYOBI Pressure Washer with low/no water pressure
Make sure the tap is turned on to medium pressure. If drawing water from non-mains supply is there enough water pressure. If drawing water from a bucket is there is not enough minimum water pressure to run the machine correctly. Check the garden…
Last update: 22/01/2023, 18:51
Troubleshoot RYOBI Pressure Washer that won't dispense soap
If your RYOBI Pressure Washer won’t dispense soap, ensure that your lance is set to low pressure. To do so, twist the end of the lance and open it to its widest setting to allow a greater water flow at a decreased pressure. Then allow up to 45…
Last update: 22/01/2023, 18:58
Why does my RYOBI Pressure Washer start then stop straight away?
If your RYOBI Pressure Washer starts then stops straight away, check that the tap is turned on fully, and that there’s enough water pressure coming from the water source. Drawing water from sources like a bucket will not provide enough pressure for…
Last update: 22/01/2023, 19:01
Troubleshoot RYOBI Pressure Washer that stops during use
If using for an extended period, it's possible the motor over-heated and the thermal overload switch has activated. Allow time for the motor to cool and then restart. The motor maybe low on power if running extra-long or multiple extension leads…
Last update: 22/01/2023, 18:57
What to do if you can’t disconnect hose from RYOBI Pressure Washer
If you can’t disconnect the pressure hose from your RYOBI Pressure Washer, it may be because the pressure hose is still under water pressure, which needs to be released. Turn off the water supply, then turn off the machine. Now, squeeze the trigger…
Last update: 22/01/2023, 18:56
How to setup a RYOBI Pressure Washer
Before you start, you have to prime the line. Connect your hose to the water supply and turn it on. With the machine in the off position, simply squeeze the trigger until you see a steady stream of water. Once that's achieved, the system is ready…
Last update: 22/01/2023, 18:52
How to set a RYOBI Pressure Washer to dispense soap
Depending on the Pressure Washer you own, the soap dispenser will be located in the front or back. If your Pressure Washer has a feed tube, it's important that when you put the cap back on, that the tube is pushed all the way to the bottom of the…
Last update: 22/01/2023, 18:50
Additional Support
MY RYOBI
PRODUCT MANUALS
WARRANTY
WHERE TO BUY
SAFETY NOTICES
