SEARCH results
12 Matching results
RYOBI Drill has no power or is losing power
Check if the battery is charged - if so, try another battery to confirm whether it is the tool or battery that isn’t working. Inspect your Drill for dust build up - if there, we recommend removing debris from your Drill with a clean paint brush,…
Last update: 19/08/2022, 15:49
Drill Bits slip in RYOBI Drill Driver chuck
Depending on the type of chuck, it’s common for smaller Drill Bits (around 1-3mm or less) not to grip. Consider using a RYOBI 18V One+ Rotary Tool (R18RT-0) if this continues to happen. The Drill Bit may also have dust or liquid on the Bit, which…
Last update: 22/08/2022, 17:08
RYOBI Drill Driver chuck hard to adjust
If your RYOBI Drill Driver chuck is hard to adjust, the chuck might have debris in the jaws, which could make adjusting the chuck stiff. Open the chuck fully and clean out any build-up of dirt and dust - preferably with compressed air.
Last update: 09/08/2022, 14:39
Bit slips out of RYOBI Drill Driver when driving screws
Bits can slip if the tips are very worn or are poor quality. Try inspecting the tip of the Bit to ensure it is not excessively worn. You should also make sure you're using the correct Bit for the fastener. Refer to the fastener packaging for correct…
Last update: 22/08/2022, 17:09
Can't tighten Drill Driver Bit in RYOBI Drill Driver chuck
The chuck securing screw has potentially loosened - tighten to avoid dropping Bits all the way into the bottom of the chuck. Depending on the type of chuck, make sure when tightening that the Bit is seated on the chuck jaws with equal seating /…
Last update: 22/08/2022, 17:10
RYOBI Drill Driver lacks power
If your RYOBI Drill Driver lacks power, check that the tool is in the correct gear setting and the Drill Bits being used are sharp and satisfactory for the work being undertaken.
Last update: 10/08/2022, 11:56
RYOBI Drill Driver slow to Drill into brick
You'll need to use a Drill with a hammer mode - select this mode and use a multi-purpose bit. Alternatively, try selecting a higher gear on your RYOBI Drill Driver, ensure you're using a masonry Drill Bit in good condition, and ensure batteries are…
Last update: 09/08/2022, 14:43
Additional Support
MY RYOBI
PRODUCT MANUALS
WARRANTY
WHERE TO BUY
SAFETY NOTICES
