36V 600mm Hedge Trimmer - Tool Only (RHT3600G)

To clean sap off trimmer blades, use a plant-based lubricant by applying it directly to the blades and running the trimmer briefly to loosen the sap. Afterward, wipe the blades clean with a dry cloth while wearing gloves for safety.

Make sure the battery is fully charged and properly inserted, then remove and reinsert it to confirm good contact and check for any debris or damage on the terminals. Also verify that the safety switch is engaged by pressing the lock-off button…

If your RYOBI battery-powered Hedge Trimmer has low runtime, ensure you’re using an appropriately sized battery. Also check that your blades are sharp, as dull blades will affect the unit’s performance and run time.

If your Hedge Trimmer blades are sticking, clean the blades with a dry brush or cloth. You should also ensure blades are lubricated before and after every use, as this helps to clean off sticky material, like sap.

If your RYOBI Hedge Trimmer cuts out, the material being cut may be too thick. Check your Hedge Trimmer’s maximum cut capacity.

Each RYOBI Hedge Trimmers has a maximum cut capacity. Check the serial plate for your model number and refer to the following list.

If your hedge trimmer is making a clicking noise, first remove the battery for safety, then inspect the blades for any obstructions such as debris or twigs. Ensure nothing is lodged between the blades, as this can prevent smooth movement and cause…