SEARCH
Enter keywords, product name, or question
The compatible disc size is dependent on your RYOBI Angle Grinder's maximum disc capacity.
Don’t use a disc larger than the maximum cutting capacity outlined below, as a larger disc can cause damage to the tool, and potentially harm you or a bystander.
| Product | Models | Maximum disc capacity | Inner diameter | Thread |
|---|---|---|---|---|
| RYOBI 125mm Angle Grinder | R18AG7-0, RAG18X, R18AG1, R18AG15, RAG80125-G |
125mm / 5 inches | 22.2mm | M14 |
| RYOBI 115mm Angle Grinder | R18AG4115-0, R18AG14 | 115m | 22.2mm | M14 |
| RYOBI 100mm Angle Grinder | EAG75100-G | 100mm / 4 inches | 16mm | M10 |
| RYOBI 230mm Angle Grinder | EAG2023RG | 230mm / 9 inches | 22.2mm | M14 |
What to check for when fitting your disc:
- The internal diameter of the disc must sit flush inside the inner flange.
- The outside diameter must have even clearance from the guard and must not touch or rub against the guard.
- You may use brush wheels, diamond cup wheels and flap discs, but they must meet the conventions outlined above.
- Removing the guard, incorrect fitment, and use of accessories with incompatible conventions can also cause damage to the tool and harm to the user.
- Not all Angle Grinders are equipped for cutting or grinding; check that the grinder you have is up to the task and the disc is rated for the speed that the tool can produce.
R18AG7-0, RAG18X, R18AG1, R18AG15, RAG80125-G, R18AG4115-0, R18AG14, EAG75100-G, EAG2023RG
