SEARCH
Enter keywords, product name, or question
- Check the battery has charge by pressing the fuel gauge button at the front of it - it needs to have two or more LEDs on.
- At the top of the handle there is a red LED. If this blinks, it means the locking pin hasn’t been fully tightened. If that happens, check that the pin is finger-tight until the LED goes out.
- The motor may not be fitted correctly to the main handle. To refit the motor, line up the locating slots, push the motor in and then twist it back all the way until the button clicks into the lock position. Now wind the locking pin all the way in to finger tight.
R18XBLV20
