How to remove RYOBI 18V ONE+ Stick Vac roller bars to clean
Last update: 16/08/2023, 13:22
Applicable Models
R18XSV9, R18XSV914, R18XSV9PET142
Before you begin:
- For maximum performance, the dust cup, filter, filtration system and rollers bars should be cleaned regularly.
- Always remove the battery pack before performing any maintenance.
- How you remove the roller bars from your RYOBI 18V ONE+ Stick Vac depends on whether your model has a coin lock, or a handle lock.
18V ONE+ Cordless Stick Vac (R18XSV6):
| Steps | Action |
|---|---|
| 1 | Take a coin and turn to the left until you see the unlock icon. |
| 2 | Remove the roller bar, clean with a cloth, and then insert back into the head. |
| 3 | Using the coin, turn to the right until it’s locked into place. |
18V ONE+ HP Cordless Pet Stick Vac (R18XSV9):
| Step | Action |
|---|---|
| 1 | No coin is needed. Turn the green handle to the left and slide out the roller bar. |
| 2 | Clean the bar with a cloth. |
| 3 | Insert back into the head and turn the green handle to the right to lock it back into place. |
18V ONE+ HP Pet Stick Vac Kit with Dual-Roller Bar (R18XSV9PET142):
| Step | Action |
|---|---|
| 1 | Take a coin and turn to the left for both roller bars (there are two in this model). |
| 2 | Pull each roller back out to clean. |
| 3 |
The brush roll has a scissor groove for easy hair removal. With scissors, carefully cut the hair out – avoid cutting the brush hairs.
Then wipe down with a cloth. |
| 4 |
The plush roll can be wiped down with a cloth.
|
| 5 | Slide both bars in and lock back into place with the coin. |
Additional Support
Image
MY RYOBI
Image
PRODUCT MANUALS
Image
WARRANTY
Image
WHERE TO BUY
Image
SAFETY NOTICES
Image
