18V ONE+ Multi Tool - Tool Only (R18MT3-0)

A RYOBI Multi-Tool can be used to remove silicone sealant effectively when fitted with the appropriate accessory. For best results, use a RYOBI Scraper Blade, sold separately, which is designed to safely and efficiently remove silicone from a…

If your cordless tool has poor battery runtime, start by testing a different fully charged battery to determine whether the issue is with the battery or the tool. Avoid running the tool continuously at maximum speed, as full-power operation drains…

When troubleshooting a power tool, check the LED indicator by attempting to activate the tool and observing whether the LED lights illuminate. If the LEDs do not turn on, this typically indicates a fault within the tool. If the product is still…

If a multi-tool stops while in use, the most common causes are battery, overheating, or accessory-related issues. Start by testing the tool with a fully charged battery and checking that the battery contacts are clean and free of debris. Overheating…

If a multi tool will not start, begin troubleshooting by checking the switch position, as fitting the battery while the switch is ON can prevent the tool from powering up. Turn the switch OFF, insert the battery, then switch the tool ON. Test the…

To change a blade on your RYOBI multi-tool, first ensure the tool is powered off and the battery is removed. Use the supplied Allen key to loosen the blade locking screw and remove the existing blade or accessory from the mounting pins. Align the…

Multi-tool blades can break due to excessive pressure, incorrect blade selection, worn accessories, or improper cutting technique. To prevent blade breakage, avoid forcing the tool and apply light, steady pressure, allowing the oscillating action to…

If your multi-tool is experiencing reduced power or poor cutting performance, start by checking that the variable speed setting is turned up. Always use the correct blade for the material, as fine-tooth blades are designed for metal while aggressive…

Brushed motor power tools may produce light sparking during initial use, which is normal as the carbon brushes wear in and settle over time. Excessive, intermittent, or violent sparking around the motor, power cord, or battery compartment indicates…

If your multi-tool cutting performance is poor, begin by checking the power supply to ensure batteries are fully charged or the tool is safely unplugged before inspection. Always use the correct blade for the task, as fine-tooth blades are best for…

If your multi-tool sanding performance is poor, start by checking that the sanding pad is securely attached and in good condition. Use the correct sandpaper grit for the task, with coarse grits suited for heavy material removal and fine grits ideal…

If the blade lever on your power tool is not operating correctly, start by removing the battery to ensure safe handling. Inspect the lever for visible damage and clean away any dust or debris that may restrict movement. Check that the accessory is…

Ryobi multi-tools are compatible with universal multi-tool blades, which are the standard fitting for most blades. They do not support Starlock blade fittings, so ensure you use the correct universal accessories for your Ryobi tool.

A RYOBI Multi Tool is a versatile oscillating power tool designed for precision cutting, sanding, scraping, and grout removal in tight or hard-to-reach spaces. Ideal when accuracy matters more than speed, it delivers controlled performance for both…

Ryobi multi-tools are versatile and can be used for cutting, sanding, and scraping, depending on the accessory fitted. Timber plunge cutting blades, available in aggressive or fine tooth profiles, are ideal for cutting notches, dowels, and trim.…

Excessive vibration and blade binding can reduce comfort, control, and cutting performance when using a multi-tool. To minimise vibration, always inspect accessories for wear or damage, ensure blades and sanding pads are correctly aligned and…