SEARCH
Enter keywords, product name, or question
RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools.
Using incorrect-sized fasteners can be dangerous and will result in the tool jamming or breaking - voiding the warranty.
Ensure the nails:
- Are compatible with the requirements of your Nailer or Stapler.
- Are in good condition.
- Are straight (respective to their angle collation.)
- Don’t have signs of rust or corrosion, as this can cause damage to the tool.
Refer to the guide on compatible nails for your tool:
| Model Number | Fastener Type* | Length Range | Collation Angle | Product Recommendation (follow the link to buy) |
|---|---|---|---|---|
| R18ST-0, R18GS18 | Narrow Crown Staple 18ga | 10mm -38mm | 0 |
PowerFit 6000 Series Narrow Crown Project Pack Staples - 4000 Pack |
| R18ST50-0 | T50 Staple | 6mm -14mm | 0 | |
| R16GN18, R18NL16-0 | C Brad Nail 16ga | 19mm -64mm | 0 |
PowerFit C Series Galvanised Brad Nails Project Pack - 4000 Pack |
| R18GN18, R18NL-0 | C1 Brad Nail 18ga | 15mm - 50mm | 0 |
PowerFit C1 Series Galvanised Brad Nails Project Pack - 4000 Pack |
| R18NL15-0 | DA Brad Nail 15ga | 25mm -65mm | 34° Angled | |
| RFN1830X | 10ga 2.87 – 3.33mm Clipped Head | 50mm -90mm | 30°-34° Angled |
*Compatible fastener type is located on your tool, like this example:
Image
**T50 is a registered trademark of Arrow Fastener Co., LLC.
R18GN18, R18ST50-0, R18NL15-0, R18NL16-0, R18ST-0, R18NL-0, R16GN18, R18GS18, RFN1830X
