What to do if RYOBI Edger won't start

If your RYOBI Edger isn't starting: 

• For 18V or 36V Battery models: check the battery has charge by pressing the fuel gauge.
• For AC models: turn the power point switch off and check the cord is inserted correctly in the extension lead. Use a heavy-duty extension lead no longer than 25m for optimal performance.
• Check the coupler connection between the motor and shaft is joined correctly.
  • Firstly, remove the battery or turn off the power.
  • Loosen the coupler and ensure that the power head and lower shaft are pushed together, then tighten coupler clockwise.