Step-by-Step Guide to Changing the Line on a Ryobi Line Trimmer

Safety First: Remove the battery.
Important: Always wear protective gloves before any maintenance.

How to Disassemble and Replace the Spool on Your Ryobi Line Trimmer

1. Turn off and remove battery for safety. 
2. Turn the trimmer over to access the spool housing. 
3. Press the tabs on the sides of the spool cover to remove it. 
4. Pull out the old spool. 
5. Insert the new pre-wound spool into the housing. 
6. Thread the line through the eyelet on the trimmer head. 
7. Replace the spool cap.