SEARCH
Enter keywords, product name, or question
PRODUCT SUPPORT

RYOBI Pressure Washer has low or no water pressure

11/07/2025, 15:35

Line not primed
The line needs to be primed before use. Not doing so will affect the stream of water. Run water through the system for a minute or two to remove any air.

Tap setting
Make sure the tap is turned on to medium pressure.

Not enough water pressure
If the water is being drawn from a non-mains supply, ensure there's enough water pressure.

Kinks in the hose
Check the connecting garden hose for kinks or blockages.

Filter blockage or build-up
If your model uses an inline water filter, check that it’s not blocked or clogged with debris. Clear any blockages and clean the filter.

Blockages in nozzle
Check the nozzle for blockages and clear it using the supplied cleaning tool.

Water contaminants
If using water from a tank, check the water quality. Tank water may contain contaminants that can block the nozzle.

Multiple extension cords (corded models)
If your model is corded and you're using multiple extension cords, the motor may be low on power. Use only one outdoor-rated lead no longer than 25 meters.

 

 

 

Applicable Models

RACPWS2, RACPW140, RACPWS140K, RPW170-G, RPW140-G