RYOBI Brad Nailer not firing or is misfiring

Nailer Troubleshooting Checklist
Safety First

• Disconnect the tool from the air supply before performing any checks.
• Always keep the tool pointed away from yourself and others.
   

Inspection Steps
1.    Check for Fasteners

• Release the magazine latch and inspect the magazine to ensure it contains nails.
   

2.    Verify Nail Compatibility

• Ensure you're using the correct gauge nails for your nailer model.
   

3.    Clear Jams

• If a jam occurs:
• Open the magazine and remove all nails.
• Use a flat-head screwdriver to carefully remove the jammed nail.
   

4.    Check Air Supply

• Ensure the air hose is securely connected.
• Confirm the compressor is delivering at least 85 PSI.
   

 Warranty Support
If the issue persists and your tool is still within the warranty period, return it to Bunnings with your receipt or proof of purchase for a warranty assessment.