How to use a RYOBI 30L M-Class Wet & Dry Vacuum's self-cleaning filter system

Last update: 12/10/2023, 14:10

Applicable Models

RACWDV30MC

 

Step Action
1 To initiate the self-cleaning filter system, move the on/off switch to the on position, and adjust the airflow speed control to max.
2 Insert the end of the hose directly into the self-cleaning button on the top of the vacuum.
3 Press the button all the way down four times to clean the filter.
4 Repeat the process two or three times to agitate the remaining dirt and debris in the filter.
Tips
  • The red LED will blink when suction is poor, indicating it's time to clean the filter or empty the collection bag - ignoring this for too long will result in a dirty filter, which reduces it's effectiveness.
  • To maintain maximum suction, regularly check the collection bag when it's full.
  • Give the inside of the collection tub a good wipe out of any residual dust not collected in the bag.

Additional Support