How to Use a Ryobi Nail Gun: Tips and Tricks

Safety First 

• Wear eye protection and other appropriate PPE. 
• Ensure the battery is removed before loading nails or making adjustments. 
• Never point the tool at yourself or others. 
   

1. Load Nails 
   • Pull back the pusher on the rear-loading magazine. 
   • Insert appropriate nails/staples- Please refer to manual for appropriate nail/staple sizing. 
   • Push the pusher up gently to secure the nails, it will click in. 
      
2. Insert Battery 
   • Slide the compatible RYOBI ONE+ battery into the battery port until it clicks. 
      
3. Adjust Depth of Drive 
   • Rotate the depth adjustment wheel to set how deep nails are driven. 
   • Test on scrap material to confirm the setting. 
      
4. Fire a Nail 
   • Press the safety contact tip firmly against the workpiece, it will depress. 
   • Hold the trigger for at least 0.5 seconds to fire a nail. 
   • Let the tool recoil naturally—do not press it down forcefully. 
      
5. Clear a Jam (if needed) 
   • Remove the battery. 
   • Open the jam release mechanism. 
   • Clear any stuck nails or debris. 
   • Close the mechanism and reinsert the battery.