Safety First: Always wear protective gloves and ensure the mower is powered off before starting any maintenance.
Step 1: Disconnect Power
Remove the isolator/safety key and battery packs from the mower.
Step 2: Position the Mower
Carefully tilt the mower onto its side so that the blade is positioned vertically for safe access.
Step 3: Clean the Blade Area
Wipe away any grass, dirt, or debris around the blade using a soft cloth to ensure a clean working surface.
Step 4: Secure the Blade for Removal
Insert a U-bolt to lock the blade in place and prevent it from rotating.
Step 5: Remove the Blade Assembly
Using a 15 mm spanner, loosen the blade nut.
Detach and remove the blade nut, spacer, blade insulator, and the blade itself.
Step 6: Install the New Blade
Align the new blade with the designated cut-outs on the blade mount.
Step 7: Reassemble Blade Components
Reinstall the blade insulator and spacer in their correct positions.
Step 8: Secure the Blade
Reinsert the U-bolt to hold the blade stationary.
Tighten the blade nut using a 15 mm spanner. Ensure the blade bolt is secured.
