Important: Always wear protective gloves and ensure the mower is completely powered off before performing any maintenance.
Step 1: Power Down the Mower
Remove the isolator/safety key and disconnect the battery packs from the mower to ensure complete power isolation.
Step 2: Position the Mower
Carefully tilt the mower onto its side, ensuring the blades are in a vertical position for safe access.
Step 3: Clean the Blade Area
Use a soft cloth to remove any dirt, grass, or debris around the blade area before beginning the replacement.
Step 4: Secure the Blade for Removal
Insert a wooden block (or wood chuck) between the blades and the cutting deck to prevent the blade from rotating.
Step 5: Remove the Blade Assembly
Using a 15 mm spanner, loosen the blade nut.
Detach and remove the blade nut, spacer, blade insulator, and the blades.
Step 6: Install the New Blade
Align the new blades with the designated cut-outs on the blade mount.
Step 7: Reassemble Blade Components
Reinstall the blade insulator and spacer in their correct positions.
Step 8: Secure the Blade
Once again, insert a wooden block to prevent the blade from rotating.
Tighten the blade nut using a 15 mm spanner, ensuring the blade bolt is secured.
