SEARCH
Enter keywords, product name, or question
| Step | Action |
|---|---|
| Note: | All tools are included with exception of a socket wrench with a 13mm, a pair of sharp scissors as well as a tyre pressure gauge. |
| 1. | Start by cutting the small zip ties securing the plastic cover. |
| 2. | Then, remove the boxes containing loose parts, assembly hardware and the documentation. |
| 3. | Then set aside all accessible packaging and wrapping from the unit and parts. |
| 4. | Don’t throw away the packing material until you have carefully inspected and operated the mower to your satisfaction. |
| 5. | Cross-check all items listed in the packing list are included. Lay everything out, inspect the mower and parts carefully for any breakage or damage that may have occurred during shipping. |
| 6. | Should you find any of the parts damaged or missing, call RYOBI Customer Service on 0508 697 9624 to arrange replacement of any missing or damage parts |
| 7. | Using your 13mm socket and supplied spanner, remove the bolts securing the corner and side braces to the frame bottom. |
| 8. | Then lift the braces to remove them. |
| 9. | Carefully cut the nylon straps securing the front and rear wheel axles to the frame. |
R80XZTR30
