How to Load a Ryobi Airstrike 18 Gauge Nail Gun

1: Safety First

• Remove the battery from the tool before loading nails.
• Ensure the trigger is not pressed and the tool is not pointed at yourself or others.

2: Prepare the Nails

• Use 18-gauge (18 Ga) brad nails.
• Acceptable length range: 15 mm to 50 mm (5/8” to 2”).
• Ensure nails are clean and undamaged.

3: Load the Magazine

1. Locate the rear-loading magazine at the botttom of the tool.
2. Pull back the pusher (spring-loaded follower) until it locks into place.
3. Insert the strip of nails into the magazine:

• Pointed ends down
• Nail heads facing up and toward the tool

      4.   Release the pusher gently to allow it to press against the nails.

4: Reinsert the Battery

• Slide the battery pack into the battery port until it clicks securely into place.

5: Test Fire (Optional)

• On a scrap piece of wood, test fire a few nails to ensure:
• Proper feeding
• Correct depth
• No jamming