How to load narrow Crown Staples into the RYOBI 18ga Narrow Crown Stapler

Before you begin, make sure that you have 18ga Narrow Crown Staples as any other gauge or type will damage the Stapler. We recommend the PowerFit 6000 Series Narrow Crown Project Pack Staples - 4000 Pack.

1.	Remove the battery from the Stapler before loading Staples into the magazine.
2.	At the bottom of the magazine, depress the toggle switch to release the magazine. The magazine can then be pulled back exposing the track to lay the staples.
3.	Load the staples into the magazine track cavity.
4.	Return the magazine cartridge by pushing back until you hear it click into place.

Applicable Models

R18GN18, R18NL-0