How to load nails into a RYOBI 18V 18ga Brad Nailer
Last update: 16/09/2024, 15:36
Applicable Models
R18GN18, R18NL-0
Before you begin:
- Make sure that you have 18ga C1 Brad Nails, as any other gauge will damage the Nailer.
- We recommend the PowerFit C1 Series Galvanised Brad Nails Project Pack - 4000 Pack.
| Step | Action |
|---|---|
| 1. | Before loading nails into the magazine, remove the battery from the Nailer. |
| 2. | At the bottom of the magazine depress the toggle switch to release the magazine. |
| 3. | The magazine can then be pulled back, exposing the track to lay the nails. |
| 4. | Load the nails into the magazine track, making sure the nails face towards the nozzle place as far to the left as possible. |
| 5. | Return the magazine cartridge by pushing it back until you hear it click into place. |
Additional Support
Image
MY RYOBI
Image
PRODUCT MANUALS
Image
WARRANTY
Image
WHERE TO BUY
Image
SAFETY NOTICES
Image
