How to install the side chute on a 80V 30" Lithium Zero Turn Ride-On Mower

Last update: 17/03/2023, 13:56

Applicable Models

R80XZTR30

Step Action
1. To install the side discharge chute on a 80V 30" Lithium Zero Turn Ride-On Mower, first lift and hold open the mulch cover with one hand.
2. Then with the other insert the side discharge chute aligning the two notches with the tabs on each side of the mulch cover.
3. Lower the mulch cover until the tabs are seated into the notches on the side discharge chute.

Additional Support