How to install the joystick on a RYOBI 80V 42" Lithium Zero Turn Ride-On Mower

Last update: 17/03/2023, 13:11

Applicable Models

R80XZTR42

Step Action
Note: The hex screws are found in the parts bag supplied with your RYOBI 80V 42" Lithium Zero Turn Ride-On Mower. 
1. Start by inserting the joystick through its dust cover. On the mower, pull the joystick spindle up fully.
2. As you lower the joystick over the spindle, align the two holes on the joystick with the holes on the spindle.
3. Insert the two supplied hex screws and tighten them securely with the included hex key. Note: The hex screws are found in the parts bag supplied with the mower.
4. Then, pull the dust cover down and align its tabs with the slots in the base. Press down each tab until they click, which locks the dust cover into place.

Additional Support