How Do I Replace or Sharpen the Cutting Blade?

How to Replace or Sharpen the Cutting Blade

1. Remove the battery pack
   Always disconnect the battery before performing any maintenance.
2. Remove the housing
   • Use a T10 screwdriver to remove the housing screws.
3. Remove the blade assembly
   • Remove the locking screw and nut with a hex key and socket wrench.
   • Carefully take out the old blade.
4. Install the new or sharpened blade
   • Position the new or sharpened blade in place.
   • Ensure proper alignment for safe operation.
5. Reassemble the tool
   • Replace the locking screw and nut, then the housing screws.
   • Tighten all screws securely.

Tip: Regularly inspect the blade for sharpness, chips, or damage. Properly maintained blades ensure efficient cutting and safer operation.