How to connect a 36V Battery with a 80V 42" Lithium Zero Turn Ride-On Mower

Last update: 17/03/2023, 14:51

R80XZTR42

36V batteries are to be used as boosters or an extension to the energy storage that increases the overall runtime.
You can't use a 36V battery by itself to power a RYOBI Lithium Zero Turn Ride-On Mower.
The RYOBI 80V Lithium Zero Turn Ride-On Mower is designed to run on 80V batteries.
At least one 80V battery is required to operate the product.

Step	Action
1.	To connect a 36V Battery with a 80V 42" Lithium Zero Turn Ride-On Mower, open the battery covers located on each side of the mower.
2.	Then raise each battery from its port and remove the foam packing from the bottom of the port.
3.	To reinsert the batteries, align the raised ribs on the battery with the grooves in the battery port, then push the battery all the way down.
4.	The battery is fully seated when the latch on the bottom of the battery snaps in place.