14 Matching results
How to connect/disconnect hose or tool to RYOBI Air Compressor
To connect an air hose or air tool from your Compressor, make sure the air compressor is turned off and unplugged from the power source. Rotate the pressure regulator knob fully counter-clockwise. Confirm that the outlet pressure is at zero (0) bar…
Last update: 10/07/2023, 15:26
Can't connect hose to RYOBI Air Compressor
Check that the couplings on the compressor hose and the tool are matching. If your compressor has a regulator for outlet pressure, you can reduce the pressure to the fitting to make it easier to attach.
Last update: 10/07/2023, 15:48
Why is my RYOBI Air Compressor not starting?
This may be because the Air Compressor’s circuit breaker has tripped due to the unit being turned on from the power/wall outlet rather than the On/Off Power Button on the Compressor. The circuit breaker protects the Compressor’s electric motor from…
Last update: 10/07/2023, 15:46
What oil to use in RYOBI Air Compressor
For all RYOBI Air Compressors with a wet sump, the specified oils are synthetic oil SAE-30. This type of oil is commonly used in small engines such as outdoor equipment and 4-stroke lawn mowers.
Last update: 09/11/2022, 09:26
How to put oil in a RYOBI Air Compressor
RYOBI Compressors require a synthetic oil SAE-30, commonly found in small petrol engines such as lawn mowers. You require less than 1 litre for topping up. Ensure your unit is secure, sitting on a level surface. The Oil Fill Hole Cap can be found at…
Last update: 09/11/2022, 09:27
Why does my RYOBI Air Compressor make a hissing sound?
That noise is normal and occurs each time the pump automatically turns off once the tank is full or is switched off via the compressor’s on/off switch. The release of air is the pump unloading the built-up air in the system ready for the next time…
Last update: 10/07/2023, 15:44
How to turn RYOBI Air Compressor on and off
Compressors should only be turned on and off from their power button. Switching an Air Compressor off from the power outlet won’t allow for unloading to occur, which will then lead to stalling the Compressor’s electric motor the next time you try to…
Last update: 10/07/2023, 15:41